ElectrodEcontamination

NEW IMPLEMENTATION


The electrodecontamination process is very effective for labile or fixed contamination

This is a process for both maintenance or dismantling operations.

 

Materials which do not conduct electricity are excluded from this type of process.

Indeed, the electrodecontamination process has existed for several decades and has proven its effectiveness during multiple decontamination operations. However, its application was limited because the electrode used, was made of hard material (stainless steel, graphite) and it was mandatory to use a smear between the metal to be decontaminated and the electrode. Due to the rigid shape of the electrode, it was impossible to use this process on complex surfaces (corners, threads, rack...)


 It was in Australia in 2009 that the first brush system was developed, comprising several hundred thousand carbon fibers to remove traces of oxidation after welding operations.


 REUTER, a German company markets different equipment and has developed multiple accessories (multiple brushes, brush for piping, telescopic broom) to adapt the process to the geometry of the parts to be cleaned.

Carbon fibres are excellent conductors The fibres of the carbon fibre brush hug the shape of the work piece during the cleaning process; different brush sizes, shapes and types make any cleaning task easier. Flexible extension of fibres from a Teflon sliding sheath can be used to reach corners and gaps. And  patented in-pipe brushes allow pipes and holes to be cleaned from the inside..



Automatic Electrolyte Supply System

This is simply connected to any cleaning device . A voltage sensor measures the cleaning energy – and the servo pump doses exactly the right amount of electrolyte, which is then delivered via the hose system and AutoFeed handle directly into the carbon fibre brush.

As soon as the brush is lifted off the workpiece, the electrolyte supply stops ; with a back pump that prevents dripping.



- Using the brush previously dipped in an electrolyte, you can dissolve the oxide layer and erode the base metal.

- Depending on the electrolyte chosen, you can improve the final surface by reducing the roughness (Ra) and thus reduce the risk of subsequent contamination.

Done with ORANO DS



Large surfaces decontamination

Several possibilities:

  • 4-fold brush
  • Surface cleaner with telescopic handle


Electrodecontamination : Equipments, Electrolytes

Function of your need (prices are between 2 and 5 k€) :

- Small or large surface decontamination

- Portability (weight between 7 kg and 32 kg)

- Autonomy (on battery)

- Productivity

- Distance between device and brush (from a few meters up to 100 m)

 

Choose the electrolyte according to the desired result and the waste acceptances:
- Phosphoric acid (10, 40 or 75% by mass)
- Sulfophophosphoric acid
- Nitric acid



Télécharger
Electrodecontamination Technical Sheet.p
Document Adobe Acrobat 2.7 MB

Do you want to understand what chemical reactions are involved?

Watch this tutorial video which includes all the above indications and which explains how this process works (in French!)


For more information, tests